3m Construction Mat

3m Construction Mat is easy to operate and convenient for modular work. After completing the work in one area, the platform can be directly moved to another area, overcoming the limitations of traditional ballast platforms.

When laying the steel plate Construction Mat, a compactor is needed to compact the surface of the garbage, and then a bulldozer is used to level it. After compaction, spread a thin layer of soil and then level the surface. Then lift the steel plates with a crane and align them with a bulldozer. To prevent the unloading platform from settling, steel plates are installed at the bottom of the unloading platform to reduce the risk of settlement. Garbage sedimentation may also cause gaps between steel plates. In this case, iron chains can be used to connect adjacent steel plates to form a unified structure, reducing settlement and displacement. The gap should be controlled within 10 centimeters to ensure the safe passage of vehicles.

Product maintenance

For the maintenance of 3m Construction Mat, the main problems are that the landfill environment is prone to cause corrosion of steel plates and accumulation of debris in the trench, affecting friction. Regularly use a shovel slightly smaller than the trench to remove debris, maintain the effective function of the 14 anti-slip strips, rinse with a small amount of water, and then sweep with a broom to ensure the road surface is clean. This will also extend the service life of the steel plate.

Product selection

When choosing 3m Construction Mat, please ensure that its type meets your project requirements. Different roadbed boxes have different load-bearing capacities and sizes. Choose the appropriate type based on your actual construction needs. As a building materials manufacturer with many years of experience, Shenghui can provide you with high-quality products and professional technical support services. Welcome to contact us!